Welcome Guest [Login] or [Sign Up]
Cart: 0 items worth $0.00
Welcome Guest [Login] or [Sign Up]


ShockTec™ Plus is a digital shock detector with a door/window magnetic contact for internal use that provides reliable 24-hour perimeter protection. A break-in is detected as soon as the intruder attempts to force, smash, drill or even saw through the protected window, door, wall or roof.

ShockTec™ employs an advanced digital microprocessor to analyze the vibration signal received from the electric sensor.
A unique feature of ShockTec™ Plus is digital sampling of the signal simultaneously in two separate channels, each channel amplified at a different gain. This provides an extremely wide dynamic range of the sampled signal, enabling precise measurement and analysis of the shock signal.

The ShockTec™ Plus model has a magnetic reed switch for double protection of shock plus opening of windows or doors, connected to two separate zones in the panel. Any attempt to defeat the detector by using large magnets, as defined by EN-50131-2-6 Security Grade 2 requirements, will cause a tamper.


  • Digital Microprocessor with Intelligent Digital Signal Processing
  • Gross Attack detection
  • Incorporates a door/window magnetic contact for shock and contact protection (separate zones)
  • Attempts to defeat the contact with large magnets cause a tamper alarm
  • Intelligent Digital Signal processing – differentiates between naturally caused vibrations and cuts out frequencies that cannot be caused by an illegal entry attempt
  • Ideal for windows, doors, walls and roofs
  • Encapsulated bi-morph piezo electric sensor


Coverage and sensitivity
Detection coverage Up to 5m (16.5’) radius
Adjustable vibration sensitivity 8 levels by dip switch
Adjustable vibration signal duration 4 levels by dip switch
Explosion & sledge-hammer detection Dip switch selectable
Installation and maintenance tools
Vibration generation External or internal test generator
Sensitivity indication Bar graph LEDs
Self test indications Power, low-voltage, logger memory, piezo sensor, temperature sensor
RISCO Bus Remote parameter setting and diagnostics via RISCO Group security system keypads and PC remote software
EOL resistors Built-in, jumper selectable
Power requirements
Operating voltage 9 to 16V DC
Current consumption Typically 20mA @ 12VDC
Alarm contacts 24VDC, 0.1A, Form C changeover relay
Tamper contacts 24VDC, 0.1A
Alarm contact hold time 2.5 seconds
Analog signal output For signal analysis and calibration
Remote test input
Sensitivity reduction input
Environmental conditions
Operating temperature -40°C to +70°C (-40°F to 158°F)
Storage temperature -50°C to +70°C (-58°F to 158°F)
Ingress protection rating IP43
Impact rating IK08
RFI immunity According to EN50130-4
Dimensions (L x H x W) 102 x 27.5 x 80.2 mm 
Weight 220 g

Back to the top