Welcome Guest [Login] or [Sign Up]
Cart: 0 items worth $0.00
Welcome Guest [Login] or [Sign Up]

DESCRIPTION


The integrated solar power system consists of solar panels, lithium battery, maximum power point tracking (MPPT) charging controler, and mounting brackets. It provides stable power supply for devices such as IP cameras with high conversion charging controller. Compared with conventional solar power systems, it is compact, portable, and easy to install, disassemble and maintain.

FUNCTIONS

Integrated die casting casing

Compact structure integrated with solar panel, lithium battery pack and charging controller to improve the appearance, installation, and maintenance of the system.

Monocrystalline solar panel

Adopt monocrystalline solar panel to greatly improve light absorbance efficiency and power generation performance with dusky light.

Lithium battery

Iron phosphate lithium battery has smaller size and longer cycle life compared with conventional lithium battery.

Remote monitoring with App

With Dahua cameras, you can real-time remotely monitor the system operation status and receive alarm prompts for low battery.

Maximum Power Point Tracking charging controller (MPPT)

MPPT controller helps significantly improve the energy utilization efficiency of the system, and raise the charging efficiency by 10%–30% compared with conventional PWM controller.

12.8V DC, non-standard PoE power supply

The wiring is easier with the combination of power supply by 12.8V DC and none-standard PoE.

RS-485 port

RS-485 port and standard Modbus protocol can satisfy communication requirements in various scenarios.

Electronic protection

Comprehensive electronic protection: Current limiting, short circuit, and reverse current protection of solar panel; reverse connection, overvoltage, over-discharge, and over-temperature protection of lithium battery; overload and short circuit protection of load.

SPECIFICATIONS

System
Output Voltage 12.8V DC (11.1V DC to 14.6V DC)
Output Current 1.5A
Standard Backup Time (20°C) Backup time(h)=576Wh/total load power consumption (W) For example, the total load power consumption is 6W, then backup time: 576Wh/6W=96h
Idling Power Consumption  
Solar Panel
Type Monocrystalline silicon
Maximum Power 120W
Solar Cell Efficiency 21%
Maximum Mechanical Load 5400Pa
Battery
Type Lithium iron phosphate battery
Rated Capacity (20°C, 5hr) 576Wh (12.8V/45Ah)
Low Temperature Discharge (-20°C, 5hr) ≥80% of rated capacity
High Temperature Discharge (60°C, 5hr) ≥90% of rated capacity
Maximum Charging Voltage 14.6V DC
Maximum Charging Current 10A
Protection
Over-discharge Protection Voltage 11.1V DC
Low Temperature Charge ≤-10°C (14°F)
Low Temperature Discharge ≤-20°C (-4°F)
Others Over-temperature and overvoltage protection of battery; overload and short circuit protection of load.
Port
Power Output Φ5.5mm×Φ2.1mm×12mm (Φ0.22"×Φ0.08"×0.47")
RS-485 N/A
RS-485 to Ethernet 1*RJ-45 (connect to LAN port of the wireless device)
Network 2*RJ-45 (the non-PoE is for the wireless device and the other connects to the camera)
General
Casing Material Aluminum
IP Rating IP66
Installation Pole-mount, suitable for Φ76~96mm (Φ3.0"~Φ3.78") pole
Adjustable Angle Range Pan: 0°~360°
Tilt: -75°~80°
Operating Altitude <3000m 
Applicable Area Daily solar radiation≥4.5h
Operating Temperature Day (charging mode): 0°C~60°C (32°F~140°F)
Night (discharging mode): -20°C~60°C (-4°F~140°F)
Operating Humidity Less than 95% RH
Storage Temperature 0°C~+40°C (32°F~104°F)
Storage Humidity Less than 95% RH
Dimensions 1149.5mm×670mm×455.2mm (45.26"x26.38"x17.92")
Net Weight 33kg (72.75lb)
Gross Weight 44.2kg (97.44lb)
Certification
Certification EN61000-6-2, EN61000-6-4
FCC: FCC Part 15 Subpart B

Back to the top

loader